Tru-Balance Centering Pin Set

This is a reusable tool that is used at the 12, 4 and 8 o'clock positions when mounting the tires. Once the wheels have been mounted, the three centering pins are removed.

Includes Thread Chaser and Wire Brush

Tru-Balance Centering Pin Set

This is a reusable tool that is used at the 12, 4 and 8 o'clock positions when mounting the tires. Once the wheels have been mounted, the three centering pins are removed.

Tru-Balance Centering Pin Set

This is a reusable tool that is used at the 12, 4 and 8 o'clock positions when mounting the tires. Once the wheels have been mounted, the three centering pins are removed.

Tru-Balance Deburr Knife

Used to remove damaged edges or burrs in wheel mounting holes

Tru-Balance Digital Replacement Gauge

Tru-Balance External Centering Sleeves

These sleeves stay on the wheel stud permanently and are used at the 12, 4 and 8 o'clock positions. One set includes six sleeves and will center one axle. (Use three sleeves per wheel)

Tru-Balance External Centering Sleeves

These sleeves stay on the wheel stud permanently and are used at the 12, 4 and 8 o'clock positions. One set includes six sleeves and will center one axle. (Use three sleeves per wheel)

Tru-Balance External Centering Sleeves

These sleeves stay on the wheel stud permanently and are used at the 12, 4 and 8 o'clock positions. One set includes six sleeves and will center one axle. (Use three sleeves per wheel)

Tru-Balance External Centering Sleeves

These sleeves stay on the wheel stud permanently and are used at the 12, 4 and 8 o'clock positions. One set includes six sleeves and will center one axle. (Use three sleeves per wheel)

Tru-Balance External Centering Sleeves

These sleeves stay on the wheel stud permanently and are used at the 12, 4 and 8 o'clock positions. One set includes six sleeves and will center one axle. (Use three sleeves per wheel)